Call a Specialist Today! 1300 505 257

Fortinet FortiAP 112B Access Point
Integrated Wireless Security and Access Solutions

FAP-112B_Rt-Up

The FortiAP 112B has been discontinued. Services and subscriptions can be purchased below.

Click here to jump to more pricing!

Please Note: All Prices are Inclusive of GST

Overview:

The Wireless Access Point FortiAP-112B is an outdoor IEEE 802.11b/g/n economically priced to provide wireless access on 2.4GHz frequency up to 65Mbps. The wireless access point FortiAP 112B has built-in directional antenna, which concentrates the signal up to 6dB allowing for high performance point to multipoint connections. Just like all wireless access point FortiAP products, you can configure this versatile access point in AP mode, Mesh mode, Bridge Mode, or as a remote AP.

High Performance Secure Thin Access Pointse

  • Leverage existing FortiGate or FortiWiFi platforms as controllers for low TCO
  • Full range of authentications and access for all use cases
  • Integration with FortiManager and FortiAnalyzer for unified control and reporting
  • Fast Roaming for uninterrupted data access
  • Automatic Radio Resource Provisioning (ARRP) for optimized throughput
  • Flexible deployment options with simple per device pricing
  • Layer 7 application QoS for maximum business productivity
  • Rogue AP control for PCI DSS compliance

The Need for a Fortified Wireless LAN

Enterprises are looking to increase productivity through uninterrupted access to applications and resources, without compromising security and agility. You want to increase visibility and control of your wireless network traffic by enforcing the same policies as your wired network and eliminate potential blind spots. You also need a solution that helps you meet compliance by proactively blocking unauthorized access all while providing tools for business continuity by following industry best practices.

Integrated Wireless Security and Access Solution

Fortinet’s FortiAP-112B wireless thin access point delivers secure, identity-driven WiFi client access that creates a fortified WLAN network. Centrally managed by a FortiGate® or FortiWiFi™ platform with its integrated wireless controller, FortiAPs allow you to deploy a comprehensive, integrated security solution for your wireless and wired networks. By acting as a wireless controller, FortiGate or FortiWiFi security platforms enable you to deploy comprehensive unified threat management (UTM) protection over your wireless network.

Economical and versatile thin Access Point

The FortiAP-112B provides standards-based IEEE 802.11b/g/n economically priced to deliver wireless access on the 2.4GHz frequency at data rates of up to 65Mbps. The FortiAP has builtin directional antenna which directs signal up to 6dB allowing for high performance, long reach point-to-point connections. Just like all FortiAP products, this versatile AP can be configured to operate in AP mode, Mesh mode, Bridge Mode, or as a remote AP.

  • In AP mode, FortiAP can provide outdoor wireless access, and leverages the FortiGate security and authentication features such as guest user self provisioning and metered bandwidth hotspots
  • The same access point can be used as a Mesh wireless client enabling point-to-multipoint coverage for large outdoor coverage. FortiAP includes dual Ethernet interfaces allowing a Mesh node to bridge traffic to a remote security camera or bridge two LAN networks in different buildings.
  • The access point can also be installed at a remote location without a physical FortiGate on site. It will tunnel its traffic securely over the Internet to a cloud-based wireless controller, allowing versatile yet low cost deployment.

Features & Benefits:


Features Benefits
Enteprise Unified Threat Management Protects your network with the widest range of security and networking technologies seamlessly integrated into a single device: Firewall, IPS, Application Control, VPN, Web Filtering, and many others.
Application-Layer Quality of Service Going above and beyond Wireless Multimedia Extensions (WME) by offering layer 7 traffic shaping and application use control.
Robust rogue AP control Industry’s most comprehensive monitoring, detection and suppression of rogue APs for PCI DSS compliance.
'Single Pane of Glass' Management Concol Unmatched visibility and control of all wired and wireless network traffic that eliminates blindspots in your security infrastructure and ensures consistent and effective policy enforcement and compliance.
One Access Point, Many Uses Software reconfiguration allows one radio to be dedicated to wireless air monitoring while the other provides full AP functionality to client; software license allows simultaneous mesh backhaul and remote AP functionality.
TX Beam Forming (TxBF) and Maximal Ratio Combining (MRC) Leads to wider coverage and optimum performance due to extended Rate over a longer range.

Deployment:

FortiAP Deployment

Antenna direction

The FortiAP 112B has a directional antenna located on the front of the device. The strongest signal is achieved in the 60 degree range shown in the below image.

Antenna direction
For a reliable wireless connection, the units to which you would like to connect should be within this range.

Performance Table:


RF RX/TX Performance Table
  Radio 1
  2.4GHz
802.11 b Tx Power (dBm) Rx Sensitivity
1 Mbps 24 -93
11 Mbps 24 -88
802.11 g
6 Mbps 24 -92
9 Mbps 24 -88
12 Mbps 24 -88
18 Mbps 24 -85
24 Mbps 24 -82
36 Mbps 23 -79
48 Mbps 22 -75
54 Mbps 21

-73

802.11n HT20
MCS0 24 -92
MCS1 24 -90
MCS2 24 -87
MCS3 24 -82
MCS4 23 -79
MCS5 22 -75
MCS6 21 -74
MCS7 20 -73

Specifications:

FortiAP-112B Bottom View

  1. Fast Ethernet port with PoE support
  2. Fast Ethernet port
  3. Reset Button
FortiAP-112B
Hardware Specifications
Indoor/Outdoor Deployment Indoor or outdoor IP55 rated
Number of Radios 1
Number of Antennas 1 Internal
Peak Antenna Gain 6dBi
Frequency Bands (GHz)* 2.400 - 2.4835
Frequency of Radio 1 2.4GHz IEEE b/g/n
Tx/Rx Streams (802.11n mode) 1x1 MIMO with 1 spatial stream 65 Mbps association rate
Ethernet Port 2 x 10/100
Serial Console Port No
Power over Ethernet (PoE) 15.4W
WME Multimedia Extensions Yes (4 priority queues for voice, video, data and background traffc)
Simultaneous SSIDs 8 (7 for client access, 1 for monitoring)
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST
User/Device Authentication WPA™ and WPA2™ with 802.1x or Preshared key, WEP and Web Captive Portal, MAC blacklist & whitelist
Maximum Tx Power 24 dBm (250mW) *
IEEE Specifications 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1X
Dimensions
Length x Width x Height 7.3 in (18.5 cm) x 2.6 in (6.6 cm) x 1.3 in (3.3 cm)
Access Point Weight 9.5 oz (270 g)
Package (shipping) Weight 16.8 oz (476 g)
Mounting Options Wall mount and Pole mount options, drywall anchors supplied
Environment
Power Adaptor Power adapter and PoE injector included
Humidity 10% to 90% non condensing
Operating Temperature -4 – 140 ˚F (-20 – 60 ˚C)
Storage Temperature -4 – 158 ˚F (-20 – 70 ˚C)
Target Application Economical Outdoor point to point bridging and guest wireless
Directives Low Voltage Directive RoHS

* Frequency selection and power may be restricted to abide by regional regulatory compliance laws

Services & Support:


FortiGuard Security Subscription Services

FortiGuard Security Subscription Services deliver dynamic, automated updates for Fortinet products. The Fortinet Global Security Research Team creates these updates to ensure up-to-date protection against sophisticated threats. Subscriptions include antivirus, intrusion prevention, web filtering, antispam, vulnerability and compliance management, application control, and database security services.

FortiCare Support Services

FortiCare Support Services provide global support for all Fortinet products and services. FortiCare support enables your Fortinet products to perform optimally. Support plans start with 8x5 Enhanced Support with "return and replace" hardware replacement or 24x7 Comprehensive Support with advanced replacement. Options include Premium Support, Premium RMA, and Professional Services. All hardware products include a 1-year limited hardware warranty and 90-day limited software warranty.



Fortinet Support Offerings

8x5 Enhanced Support 24x7 Comprehensive Support PRMA Next Day Delivery PRMA 4 Hour On-Site Parts Delivery PRMA 4 Hour On-Site Engineer
Web Access
On-line documentation 24x7 24x7 24x7 24x7 24x7
Product regisration 24x7 24x7 24x7 24x7 24x7
Technical Support
Phone 8x5 24x7 24x7 24x7 24x7
Web 8x5 24x7 24x7 24x7 24x7
Chat 8x5 24x7 24x7 24x7 24x7
Software Support
Firmware downloads 24x7 24x7 24x7 24x7 24x7
Hardware Support
 
  • Return and Replace Hardware Replacement
  • Site address needs to be confirmed before purchase
  • Customer returns faulty device to Fortinet TAC based in Sydney
  • Signed acknowledgement of replacement hardware delivery
  • NBD Advanced Hardware Replacement
  • NBD replacement is only available for NSW, QLD, VIC & ACT
  • For WA, SA, NT & TAS, delivery is within 3-5 business days
  • Site address needs to be confirmed before purchase
  • RMA needs to be verified by the TAC by 2pm Sydney time
  • Signed acknowledgement of replacement hardware delivery
  • Customer returns faulty device to Fortinet TAC based in Sydney within 30 days after receipt of the replacement unit
  • Premium NBD Replacement
  • NBD is available for all states in Australia
  • Site address needs to be confirmed before purchase
  • RMA needs to be verified by the TAC by 3pm Sydney time for SLAs to be guaranteed
  • Customer returns faulty device to Fortinet TAC based in Sydney within 30 days after receipt of the replacement unit
  • Premium 4H Same Day Replacement
  • Parts only, delivered 24x7x4
  • Hardware is delivered within 4 hours of RMA verification by the TAC
  • Site address needs to be confirmed before purchase
  • Signed acknowledgement of replacement hardware delivery
  • Customer returns faulty device to Fortinet TAC based in Sydney within 30 days after receipt of the replacement unit
  • Premium 4H Same Day Replacement with Engineer
  • RMA parts delivered by an installation engineer 24x7
  • Site address needs to be confirmed before purchase
  • Hardware is delivered within 4 hours of RMA verification by the TAC
  • Engineer will exchange defective hardware with replacement part
  • Engineer will restore firmware and IP address
  • Engineer will not restore custom configuration file or customer data
  • Engineer will remain on-site until customer is able to access the unit to restore configuration files
  • Mutual agreement of service delivery completion
  • Engineer will leave the site with the defective part
Replacement turnaround Shipped within 3 Business Days of receipt of the defective hardware NBD for supported states, 3-5 business days for other states NBD 4 Hour Same Day 4 Hour Same Day

Documentation:

Download the Fortinet FortiAP-112B Series Data Sheet (PDF).

Pricing Notes:

Fortinet FortiAP-112B Series
FortiAP-112B FortiCare 8x5
*8x5 Support, Hardware Replacement, Firmware and General Upgrades
8x5 FortiCare for FortiAP-112B, 1-Year
#FC-10-P0112-311-02-12
List Price: $25.00
Our Price: $21.00
FortiAP-112B FortiCare 24x7
*24x7 Support, Advanced Hardware Replacement (NBD), Firmware and General Upgrades
24x7 FortiCare for FortiAP-112B, 1-Year
#FC-10-P0112-247-02-12
List Price: $45.00
Our Price: $37.00
Proprietary PoE Injector
Proprietary PoE injector with AC power adapter for FortiAP-112B
#SP-FAP112B-PA-AU
Our Price: $98.00